• Advertisement

What's Missing?

Configuring Wireless Cisco Networks and Wireless Controllers.

Re:What's Missing?

Postby Guest » Thu Sep 17, 2009 10:48 am


No prob!  Feel free to post up if you run into anything else :)

Jeff

Guest
 

Advertisement

Re: What's Missing?

Postby memoozzee » Tue May 29, 2012 8:31 am

guys , please i need to understand this ,

so if my switch has switchport access vlan 10
and in my access point GUI , i choose NO VLAN and created the ssid and broadcast it

does this work or not !!
my running configuration

version 12.4
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec
service password-encryption
!
hostname ap
!
logging rate-limit console 9
enable secret 5 $1$X2oV$NOnrfHGT8GzTHJa/ibDeZ0
!
no aaa new-model
!
!
dot11 syslog
!
dot11 ssid nayef
authentication open
guest-mode
!
!
!
username cisco privilege 15 password 7 110A1016141D
!
!
bridge irb
!
!
interface Dot11Radio0
no ip address
no ip ro

consoleute-cache
!
ssid nayef
!
antenna gain 0
station-role root
bridge-group 1
bridge-group 1 subscriber-loop-control
bridge-group 1 block-unknown-source
no bridge-group 1 source-learning
no bridge-group 1 unicast-flooding
bridge-group 1 spanning-disabled
!
interface Dot11Radio1
no ip address
no ip route-cache
!
ssid nayef
!
antenna gain 0
no dfs band block
channel dfs
station-role root
bridge-group 1
bridge-group 1 subscriber-loop-control
bridge-group 1 block-unknown-source
no bridge-group 1 source-learning
no bridge-group 1 unicast-flooding
bridge-group 1 spanning-disabled
!
interface GigabitEthernet0
no ip address
no ip route-cache
duplex auto
speed auto
no keepalive
bridge-group 1
no bridge-group 1 source-learning
bridge-group 1 spanning-disabled
!
interface BVI1
ip address 10.226.11.11 255.255.255.0
ip helper-address 172.16.28.143
no ip route-cache
!
interface BVI10
mtu 1514
no ip address
no ip route-cache
!
ip default-gateway 10.226.11.1
ip http server
no ip http secure-server
ip http help-path http://www.cisco.com/warp/public/779/sm ... g/help/eag
bridge 1 route ip
!
!
!
line con 0
login local
length 0
line vty 0 4
exec-timeout 0 0
logging synchronous
login local
line vty 5 15
exec-timeout 0 0
logging synchronous
login
!
end


as far as i see it works and i can get ip from dhcp pool server , but am still doubting
should i make them subinterfaces and assign vlan 10 to subinterf and make the switch port trunk


ok my question is when i make it in default configuration like NO VLAN and just ssid and broadcast and apply ,, and the switch port is vlan 10 , it works
does this means that when the packet comes to the switch , it assigned to vlan 10 by it self
like the packet comes from access point is raw and the switch tag it and make it 10

or i MUST make vlan 10 and subinterf and make the switch port as trunk



please enlighten me !!!!
memoozzee
Hello I'm new here
 
Posts: 1
Joined: Tue May 29, 2012 12:29 am

Previous


  • Advertisement


Similar topics


Return to Cisco Wireless

Who is online

Users browsing this forum: Google Adsense [Bot] and 2 guests