• Advertisement

Testing the Spare Parts on Huawei OptiX OSN 2500

Testing the Spare Parts on Huawei OptiX OSN 2500

Postby jorna » Thu Mar 30, 2017 6:34 pm

The spare parts on Huawei Optix equipment should be maintained so that they are ready to be used. Thus, the time taken to
replace the parts then can be effectively decreased.
Prerequisites
Important boards must be available in the inventory center.
Maintenance Period
Yearly
Tools, Equipment and Materials
T2000
Criteria
The spare boards and the boards that are used on the network should be the same in BIOS version,
SCC software version, board software version, and logic version.
Procedure
Step 1 See "Viewing the Board Information Report" in the Supporting Task of this product to query
the board information report and record the software version of each board, including the
following:
Version of Huawei SCC board, that is, NE software version
Version of the software of each board, that is, board software version
Step 2 See "Viewing the Board Manufacturer Information Report" in the Supporting Task of this
product to query the board manufacturing information report and record the bar codes of the
boards, types of the optical interfaces, and information of optical modules.
Step 3 Test the spare parts to ensure they are ready for use.
Reference Information
Follow the listed principles to maintain the spare parts.
Principle for check of spare parts:
– Check the version and quality of spare parts periodically.
– The spare boards and the boards used in the network should be the same in BIOS version,
SCC software version, board software version, and logic version.
– When the network is to be upgraded, provide the parts in time and upgrade the version
of the running parts.
Principle for storage of parts:
– The spare parts must be stored in line with regulations and be kept for exclusive use.
– The spare parts must be stored in shielding bag and no friction should be caused among
them. These bags with parts inside should be kept in special antistatic cupboard and
away from sundries.
– Wear an antistatic glove to touch the spare parts.
– The inbound/outbound information must be recorded and timely refreshed. Hence, the
parts can be supplemented accordingly.
jorna
Cisco 2611XM
 
Posts: 129
Joined: Tue Jul 07, 2015 1:23 am

Advertisement

Re: Testing the Spare Parts on Huawei OptiX OSN 2500

Postby hone » Thu Mar 30, 2017 6:44 pm

Really good sharing. Huawei OSN Optix equipment, Thunder-link.com can provide them with very competitive price
hone
Cisco Catalyst 4500
 
Posts: 254
Joined: Thu Jan 07, 2016 1:03 am



  • Advertisement


Similar topics


Return to Any Other Topic

Who is online

Users browsing this forum: No registered users and 2 guests