• Advertisement

Cisco 6509 config locked out

Hardware Specs for Cisco Routers and Switches. Cabling termination and cabling types. Performance Fans and flash Memory

Cisco 6509 config locked out

Postby ciscoeng » Sun Sep 18, 2016 6:17 am

Hi all,
from different days i'm experienced a problem when configuring a Cisco 6500.
It's a single unit but when i configure a port or other settings the equipment gave me this message:

"Config mode locked out until standby initializes"

This is the output of "show module"

Mod Ports Card Type Model Serial No.
--- ----- -------------------------------------- ------------------ -----------
1 24 CEF720 24 port 1000mb SFP WS-X6724-SFP SAL1322R0YJ
2 48 SFM-capable 48 port 10/100/1000mb RJ45 WS-X6548-GE-TX SAL1321QDH1
5 0 Unknown (Other) Unknown Unknown
6 2 Supervisor Engine 720 (Active) WS-SUP720-3B SAL1321QNWY

Mod MAC addresses Hw Fw Sw Status
--- ---------------------------------- ------ ------------ ------------ -------
1 0025.842f.53f8 to 0025.842f.540f 4.1 12.2(18r)S1 12.2(33)SXI2 Ok
2 0025.846a.4b28 to 0025.846a.4b57 11.3 7.2(1) 12.2(33)SXI2 Ok
5 0000.0000.0000 to 0000.0000.0000 0.0 Unknown Unknown Unknown
6 000a.b86d.e5dc to 000a.b86d.e5df 5.8 8.5(3) 12.2(33)SXI2 Ok

Mod Sub-Module Model Serial Hw Status
---- --------------------------- ------------------ ----------- ------- -------
1 Centralized Forwarding Card WS-F6700-CFC SAL1321QQP0 4.1 Ok
6 Policy Feature Card 3 WS-F6K-PFC3B SAL1320Q0JY 2.5 Ok
6 MSFC3 Daughterboard WS-SUP720 SAL1321QGRV 3.3 Ok

Mod Online Diag Status
---- -------------------
1 Pass
2 Pass
5 Not Applicable
6 Pass

Can someone give me an help!
Thanks
ciscoeng
Hello I'm new here
 
Posts: 1
Joined: Sun Sep 18, 2016 6:11 am

Advertisement


  • Advertisement


Similar topics


Return to Cisco Hardware

Who is online

Users browsing this forum: No registered users and 1 guest