Support for NAS servers.
I tried this command and sent it to EMC, they told me that this is not the correct WWN. this is the show version.Cisco Storage Area Networking Operating System (SAN-OS) SoftwareTAC support: http://www.cisco.com/tacCopyright (c) 2002-2005, Cisco Systems, Inc. All rights reserved.The copyrights to certain works contained herein are owned byother third parties and are used and distributed under license.Some parts of this software are covered under the GNU PublicLicense. A copy of the license is available athttp://www.gnu.org/licenses/gpl.html.Software BIOS: version 1.1.0 loader: version 1.2(2) kickstart: version 2.1(2b) system: version 2.1(2b) BIOS compile time: 10/24/03 kickstart image file is: bootflash:/m9500-sf1ek9-kickstart-mz.2.1.2b.bin kickstart compile time: 8/30/2005 19:00:00 [09/14/2005 09:22:16] system image file is: bootflash:/m9500-sf1ek9-mz.2.1.2b.bin system compile time: 8/30/2005 19:00:00 [09/14/2005 09:56:16]Hardware cisco MDS 9506 ("Supervisor/Fabric-1") Intel(R) Pentium(R) III CPU - with 1028768 kB of memory. Processor Board ID JAE1002TDNU bootflash: 500736 blocks (block size 512b) slot0: 0 blocks (block size 512b) mds9506-1 kernel uptime is 0 days 0 hour 58 minute(s) 22 second(s) Last reset Reason: Unknown System version: 2.1(2b) Service: this is the show wwn switch:Switch WWN is 20:00:00:0d:ec:24:8a:c0This is what we gave them and they said its wrong.