MDS 9506 WWN

Support for NAS servers.
Guest

MDS 9506 WWN

Post by Guest » Tue Aug 31, 2010 6:26 pm


HiI have been told by EMC to find the WWN for the 9506 MDS switch. How would i find this? I thought WWN was port based. is there a WWN for the sup modules or  the Chassis?Thanks in advance

Guest

Re:MDS 9506 WWN

Post by Guest » Tue Aug 31, 2010 6:34 pm


There are wwn's that are on the switch's side of each port and is known as the FWWN. There is also a switch WWN that is an identifier for the switch. That can gotten with this command: show wwn switch.

Guest

Re:MDS 9506 WWN

Post by Guest » Tue Aug 31, 2010 6:46 pm


Is this a new command in the OS. I did not find this on the CLI or is this hidden?. I was told by EMC that the command for this is "Show switch summary" but this was wrong.thanks in advance

Guest

Re:MDS 9506 WWN

Post by Guest » Tue Aug 31, 2010 7:52 pm


No, this is a pretty old  command. Here is one from a lab:lab9216# show wwn switchSwitch WWN is 20:00:00:0d:ec:27:00:c0If you are having trouble, can you post your show ver and show wwn switch results?

Guest

Re:MDS 9506 WWN

Post by Guest » Tue Aug 31, 2010 9:19 pm


I tried this command and sent it to EMC, they told me that this is not the correct WWN. this is the show version.Cisco Storage Area Networking Operating System (SAN-OS) SoftwareTAC support: http://www.cisco.com/tacCopyright (c) 2002-2005, Cisco Systems, Inc. All rights reserved.The copyrights to certain works contained herein are owned byother third parties and are used and distributed under license.Some parts of this software are covered under the GNU PublicLicense. A copy of the license is available athttp://www.gnu.org/licenses/gpl.html.Software  BIOS:      version 1.1.0  loader:    version 1.2(2)  kickstart: version 2.1(2b)  system:    version 2.1(2b)  BIOS compile time:       10/24/03  kickstart image file is: bootflash:/m9500-sf1ek9-kickstart-mz.2.1.2b.bin  kickstart compile time:  8/30/2005 19:00:00 [09/14/2005 09:22:16]  system image file is:    bootflash:/m9500-sf1ek9-mz.2.1.2b.bin  system compile time:     8/30/2005 19:00:00 [09/14/2005 09:56:16]Hardware  cisco MDS 9506 ("Supervisor/Fabric-1")  Intel(R) Pentium(R) III CPU - with 1028768 kB of memory.  Processor Board ID JAE1002TDNU  bootflash: 500736 blocks (block size 512b)  slot0:          0 blocks (block size 512b)  mds9506-1 kernel uptime is 0 days 0 hour 58 minute(s) 22 second(s)  Last reset     Reason: Unknown    System version: 2.1(2b)    Service: this is the show wwn switch:Switch WWN is 20:00:00:0d:ec:24:8a:c0This is what we gave them and they said its wrong.

Post Reply