I have been told by EMC to find the WWN for the 9506 MDS switch. How would i find this? I thought WWN was port based. is there a WWN for the sup modules or the Chassis?
Thanks in advance
I tried this command and sent it to EMC, they told me that this is not the correct WWN. this is the show version.
Cisco Storage Area Networking Operating System (SAN-OS) Software
TAC support: http://www.cisco.com/tac
Copyright (c) 2002-2005, Cisco Systems, Inc. All rights reserved.
The copyrights to certain works contained herein are owned by
other third parties and are used and distributed under license.
Some parts of this software are covered under the GNU Public
License. A copy of the license is available at
BIOS: version 1.1.0
loader: version 1.2(2)
kickstart: version 2.1(2b)
system: version 2.1(2b)
BIOS compile time: 10/24/03
kickstart image file is: bootflash:/m9500-sf1ek9-kickstart-mz.2.1.2b.bin
kickstart compile time: 8/30/2005 19:00:00 [09/14/2005 09:22:16]
system image file is: bootflash:/m9500-sf1ek9-mz.2.1.2b.bin
system compile time: 8/30/2005 19:00:00 [09/14/2005 09:56:16]
cisco MDS 9506 ("Supervisor/Fabric-1")
Intel(R) Pentium(R) III CPU - with 1028768 kB of memory.
Processor Board ID JAE1002TDNU
bootflash: 500736 blocks (block size 512b)
slot0: 0 blocks (block size 512b)
mds9506-1 kernel uptime is 0 days 0 hour 58 minute(s) 22 second(s)
System version: 2.1(2b)
this is the show wwn switch:
Switch WWN is 20:00:00:0d:ec:24:8a:c0
This is what we gave them and they said its wrong.
Users browsing this forum: No registered users and 1 guest