MDS9509 and write erase

Support for NAS servers.
Post Reply
Guest

MDS9509 and write erase

Post by Guest » Fri Jan 08, 2010 9:46 pm


After I ran 'write erase' command and reloaded switch, running 'sh running-config diff' gives me this resultswitch# sh running-config diffBuilding Configuration ...diff: /mnt/cfg/1/ascii/system.cfg: No such file or directoryswitch#Any help ?

Guest

Re:MDS9509 and write erase

Post by Guest » Fri Jan 08, 2010 10:20 pm


I forgot firmware levelboot system bootflash:/m9500-sf1ek9-mz.1.3.5.bin sup-1boot kickstart bootflash:/m9500-sf1ek9-kickstart-mz.1.3.5.bin sup-1

Guest

Re:MDS9509 and write erase

Post by Guest » Fri Jan 08, 2010 11:30 pm


There is no startup config to compare against after a wr erase. If you do a show startup, you will get:switch# sh startup-configNo startup configuration

Guest

Re:MDS9509 and write erase

Post by Guest » Sat Jan 09, 2010 12:32 am


You were right, I somehow thought it would create new empty startup-config. Where does it take ip address of mgmt0 then ? After restart ip address was available, admin password was set too. Which parameters are kept and where ? And is there a way how to restore all default settings ?Thank you

Guest

Re:MDS9509 and write erase

Post by Guest » Sat Jan 09, 2010 12:45 am


The IP address for mgmt is keep on a separate file and the admin password should be just the default admin password after a wr erase.

Post Reply