PPPoE multiple profiles for VPDN

IPsec, L2TP, Split tunneling, PPTP and all other VPN related posts.
Guest

Re:PPPoE multiple profiles for VPDN

Post by Guest » Wed Nov 24, 2010 8:41 am


Hi,Fine, this doesn't mean that you'll apply a different virtual-template per each class, what you are going to do is to apply a Cisco AVP per customer profile to be used to clone the virtual-access.cisco-avpair = "ip:sub-qos-policy-in=in-policy-name"cisco-avpair = "ip:sub-qos-policy-out=out-policy-name"BR,Mohammed Mahmoud.

Guest

Re:PPPoE multiple profiles for VPDN

Post by Guest » Wed Nov 24, 2010 9:26 am


Ok, so single bba group with a single virtual template on a single interface.Then a policy map for each user grouping.I found this document which looks like it has most of the info I need.http://www-europe.cisco.com/univercd/cc ... ad.htmOnce I have it sussed I'll post the final config snippet

Guest

Re:PPPoE multiple profiles for VPDN

Post by Guest » Wed Nov 24, 2010 10:28 am


Hi David,Nice document, enjoy :) And please keep us updated.By the way, since IOS 12.4(2)T:cisco-avpair = "ip:sub-policy-In=in-policy-name"cisco-avpair = "ip:sub-policy-Out=out-policy-name"Are replaced with the following new attributes:cisco-avpair = "ip:sub-qos-policy-in=in-policy-name"cisco-avpair = "ip:sub-qos-policy-out=out-policy-name"But anyway as per Cisco, the replaced attributes will be supported for several more software releases, but profiles should be updated with the new attributes as soon as it is feasible to do so.http://www.cisco.com/en/US/docs/ios/12_ ... R,Mohammed Mahmoud.

Post Reply