• Advertisement

how to connect AP_1 to AS_3

VTP, Portfast, Spanning Tree and all the other switch related stuff.

how to connect AP_1 to AS_3

Postby jorna » Tue Sep 06, 2016 10:26 pm

Create a network basic profile, and specify a pass-VLAN for mobile terminals connected
to AP_1.
S1720&S2700&S3700&S5700&S6700&S7700&S9700
Series Switches
<HUAWEI> system-view
[HUAWEI] uni-mng
[HUAWEI-um] network-basic-profile name profile_ap
[HUAWEI-um-net-basic-profile_ap] pass-vlan 202
[HUAWEI-um-net-basic-profile_ap] quit
2. Add the the port connecting AS_3 to AP_1 to an AP port group.
[HUAWEI-um] port-group connect-ap name group_ap
[HUAWEI-um-portgroup-group_ap] network-basic-profile profile_ap
[HUAWEI-um-portgroup-group_ap] as name as3 interface gigabitethernet 0/0/24
[HUAWEI-um-portgroup-group_ap] quit
[HUAWEI-um] commit as all
Warning: Committing the configuration will take a long time. Continue?[Y/N]:y
[HUAWEI-um] quit
3. Configure access parameters for AP_1.
# Configure the AP ID.
[HUAWEI] wlan
[HUAWEI-wlan-view] ap id 1 ap-type ap5010dn-agn mac ac85-3da6-a420
[HUAWEI-wlan-ap-1] quit
# Configure non-authentication for AP_1 to connect to an SVF system.
[HUAWEI-wlan-view] ap-auth-mode no-auth
[HUAWEI-wlan-view] quit
4. Power on AP_1 and connect AP_1 to AS_3 using cables.
# After connecting the cables, run the display ap all command to check whether AP_1
has connected to the SVF system successfully.
[HUAWEI] display ap all
All AP(s) information:
Normal[1],Fault[0],Commit-failed[0],Committing[0],Config[0],Download[0]
Config-failed[0],Standby[0],Type-not-match[0],Ver-mismatch[0]
------------------------------------------------------------------------------
AP AP AP Profile AP AP
/Region
ID Type MAC ID State Sysname
------------------------------------------------------------------------------
1 AP5010DN-AGN ac85-3da6-a420 0/0 normal ap-1
------------------------------------------------------------------------------
Total number: 1,printed: 1
jorna
Cisco 2611XM
 
Posts: 129
Joined: Tue Jul 07, 2015 1:23 am

Advertisement


  • Advertisement


Similar topics


Return to Cisco Switching

Who is online

Users browsing this forum: Google [Bot] and 6 guests