• Advertisement

What's the Laser Class?

MIBS, SMMPv1, SMMPv2, SMMPv3 and management

What's the Laser Class?

Postby hone » Wed Dec 28, 2016 11:00 pm

Each type of boards of the product has a different laser class.

NOTE:
The power shown in Table 1 refers to the reference output power of the laser. It is achieved when the mode-field diameter of fiber is 10 um at the 1550 nm wavelength.

The laser class complies with IEC 60825-2 laser safety standards.

For the OptiX OSN 8800, the laser level of the equipment is HAZARD LEVEL 1M.

Table 1 Laser class
Reference Optical Power Range
Laser Class
Board Type
Under 10 dBm
HAZARD LEVEL 1
D40, D40V, DCP, DCU, EG16, EX2, EX8, GS4, HUNQ2, HUNS3, LDM, LDMD, LDMS, LDX, LEM24, LEX4, LOA, LOG, LOM, LQM, LQMD, LQMS, LSC, LSCM, LSQ, LSX, LSXL, LSXLR, LSXR, LTX, LWXS, TMX, ND2, NO2, NQ2, NS2, NS3, NS4, NS4M, TEM28, TDX, THA, TOA, TOG, TOM, TOX, TQX, TSC, TSXL, TTX, M40, M40V, RMU9, TN11WSM9, TN12WSM9, TN17WSM9, TN11HSC1, SC1, SC2, ST2, SCS, TDC, PND2, TD20, TM20
10 - 21.3 dBma
HAZARD LEVEL 1M
NPO2, NPO2E, NPS4, NPS4E, SFIU, FIU, ITL, CMR2, CMR4, DMR1, MR2, MR4, MR8, MR8V, SBM2, RDU9, ROAM, WSMD2, WSD9, TN13WSM9, TN16WSM9, WSMD4, OAU100, OAU101, OAU102, OAU103, OAU106, OBU1, OLP, QCP, VA1, VA4, GFU, HBA, OAU105, OBU2, CRPC, DAS1, WSMD9, RAU1, RAU2, TN12HSC1, SRAU, DWSS20, ASE, D48, M48V, MD2, OLSP, OLSPA/OLSPB, OAU2, OBU2, OPM8, OPM8, ROP, RPC
Under 10 dBm
Class 1
DCU, EGSH, SF64A, SF64, SFD64, SL64, SLD64, SLH41, SLO16, SLQ16, SLQ64, EAS2
10 - 21.3 dBm
Class 1M
BPA
a: For the HBA, OAU105, OBU2, TN13FIU02, CRPC, RAU1, RAU2, SRAU, ROP, RPC boards, after the IPA function is enabled, the laser hazard level of the board is HAZARD LEVEL 1M, which indicates that the maximum power output by the optical port on the board ranges 10 dBm (10 mW) to 21.3 dBm (136 mW).
hone
Cisco Catalyst 3560
 
Posts: 227
Joined: Thu Jan 07, 2016 1:03 am

Advertisement


  • Advertisement


Similar topics


Return to Network Management

Who is online

Users browsing this forum: Bing [Bot] and 2 guests